NETZSCH employee next to machine

Products & Solutions

Laboratory Machines and Laboratory Systems

Solutions for your Laboratory

Wet and dry preparation, mixing, dispersing, kneading and de-aeration, as well as classifying is difficult to perfect without laboratory machines. 

They are used for development of new products, for processing smallest quantities of a high-tech product, for quality control, quality assurance and process optimization. The reproducibility of the results that are achieved is an essential point. The ease of operation and the high degree of flexibility is a plus. Additionally a low cleaning expenditure at the highest possible product recovery can be guaranteed.

Wet Mills
Dry Mills
Classifier
Laboratory Plants

Wet Mills

For wet-processing of very small batches up to pilot scale, we offer a full range of laboratory mills that deliver reproducible, scale-relevant results. Whether you are working on product development, quality control or small-batch production, you will find the right model for your requirements, from ultra-small sample quantities to pre-production volumes.

Dry Mills

For fine grinding of dry materials across all industrial sectors, our laboratory dry-mills are engineered to meet every target fineness, with or without integrated classifier. Whether your application demands simple grinding or complex ultrafine processing, you will find the laboratory solution tailored to your challenge.

  • SpheRho® Lab Size Dry Agitator Bead Mill

    The Dry Laboratory Agitator Bead Mill SpheRho® can be used for development of new products, for processing smallest quantities, for quality control, quality assurance and process optimization.

  • Condux® 60 Impact Mill

    The smallest, complete grinding plant by NETZSCH for processing a wide variety of products up to a Mohs hardness of 3 - 3.5.

  • CSM 50&80 Classifier Mills

    The laboratory version of our Classifier Mill – solid, robust and precise upper particle size limitation.

    finenesses from 10 to 150 µm (d97)

  • CGS 10&16 Fluidized Bed Jet Mills

    The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

    finenesses from 2.5 to 70 µm (d97).

  • ConJet® 10 and 16 High Density Bed Jet Mill

    A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

    finenesses from 2.5 to 70 µm (d97)

  • s-Jet® 25 Laboratory-Scale-Steam Jet Mill

    The s-Jet® 25 is the smallest laboratory unit of the s-Jet® Steam Jet Mill series. With the compact plant it is possible to produce submicron particles on a laboratory scale by dry-grinding.

Classifier

For the separation of coarse particles or for dedusting of an already ground powder, our laboratory classifiers provide precise and consistent performance. Designed for integration into dry grinding systems, they ensure sharp separation and clean output, ideal for pilot tests, quality assurance or process development.

  • CFS 5 & CFS 8 Fine Classifier

    Efficient separation of grain sizes and effective results for both coarse material and fine material separation.

    For separation limits from 3.5 to 200 µm (d97)

  • CFS 5/HD-S & CFS 8/HD-S High Performance Fine Classifier

    The smallest for the finest – exact separation results for superfine powder through best possible product classification with the sharpest separation and maximum gains.

    For separation limits from 2.5 to 100 µm (d97)

Laboratory Plants

Lab-scale operation of air jet mills or high-efficiency fine classifiers often requires not just the machine but a complete, ready-to-use system including dosing equipment, cyclone, filter, blower and electrical controls. For this purpose, NETZSCH has developed modular laboratory plant systems which can be combined with the appropriate machine module for your particular application. Whether you need a flexible pilot installation or a compact lab skid, the solution is: NETZSCH Laboratory Systems.

  • NETZSCH LabCompactPlus

    The LabCompactPlus was especially designed for use in laboratories - machine (mills or classifiers) are taken up by a swivel arm on the machine base and can be exchanged very easily.

  • NETZSCH LabCompactPlus Pressure Shock-Resistant

    The new LabCompactPlus is designed as a pressure shock-resistant laboratory plant certified for 10 bar, enabling safe fine grinding of explosive organic powders without the need for inert gas.

  • NETZSCH LabPilot

    The LabPilot is particularly suitable for flexible use in a laboratory and/or for producing small quantities of sample material. It is possible to install two different machine modules.

  • NETZSCH Modular Laboratory Plant

    The Modular Laboratory Plant can be operated with different mills and classifiers - predestined for the production of small quantities.

AI Overview
An error occurred. Please try again.