제품 소개
NETZSCH 건식 연삭 솔루션
건식 분쇄를 위한 첫 번째 선택!
네취는 건식 분쇄 분야에서 고객의 최상의 선택이 될 것이며, A에서 Z까지 모든 제품을 위한 최적의 장비를 제공합니다.
네취의 많은 경험과 다양한 종류의 분쇄기는 제품의 초 미 분쇄 및 미세 분급에 있어 최적의 결과를 제공합니다.
최고급 제품을 위한 고성능 분류기가 프로그램을 마무리합니다.
개별 밀링기부터 완전한 턴키 밀링 시스템까지, 최대 10 BAR PSR(압력 충격 방지) 비방폭 또는 방진 플랜트와 불활성 가스 플랜트, 표면이 광택 처리된 스테인리스 스틸 또는 마모 방지 모델을 포함한 다양한 디자인의 재료 실행까지, 고객에게 완벽한 솔루션이 있습니다!
임팩트 밀
In general, rotary impact mills are used for the grinding of soft products to products with medium-hardness (up to hardness 3 on Mohs scale) with a fineness of several mm down to a one-digit µm-range. These mills are equipped with a rapidly-running rotor with suitable grinding tools around which grinding tracks, screens or counter-rotating pins are used as an impact partner.
제트 밀
In jet mills the size-reduction of particles is carried out in a gas jet. The grinding gas (air or argon) is guided into the grinding chamber and accelerated in such a way, that product particles are carried along in the gas flow and impact against each other. Size-reduction is autogenous and contamination is therefore low. Jet mills are predestined for grinding dry- and very hard materials to obtain a particle fineness in a range of 0.1 µm to 100 µm.
비드 밀
There are numerous application areas which demand a high fineness at high throughput capacities with a low energy consumption, especially in the area of dry grinding. For this reason, it was important for NETZSCH to transfer the globally tried and tested agitator bead mill technology to dry-grinding and to complement the triumph of the IsaMill in wet-grinding in the mining sector with the dry agitator bead mill.
커팅 밀
Cutting mills are used to grind and homogenize medium-hard to soft and elastic materials. In this process the material is ground by shearing forces using rotary- and stator knives. As a rule, the material is fed into the machine from above, it falls onto the rotor and is ground between rotor- and fixed cutting knives.
실험실 플랜트
NETZSCH laboratory plants are setting new benchmarks as regards operating convenience, compactness and flexibility. Depending on the application, these plants are rounded off with fluidized bed jet mills, high density bed jet mills, classifier mills and impact mills, as well as fine-classifiers and high-performance fine classifier.
