NETZSCH Notify 

The mill is installed and the production line is in operation. The operator responsible looks after other production lines and is located in a different part of the building.

An unexpected failure occurs, so that, for example, the power supply, compressed air or coolant is interrupted.

The operator is alerted via the Notify app that the mill is no longer receiving power.

The operator can correct the malfunction and immediately restarts the production process.

The operator can correct the malfunction and immediately restarts the production process.

The mill is installed and the production line is in operation. The operator responsible looks after other production lines. 

In order to control the quality of the production batches, appropriate samples must be taken.

All machines are networked with Notify so that the operator can store times for each mill in the app as a notification.

The operator receives the message in good time on his device that the sample must now be taken from machine X.

The samples are submitted to the laboratory for analysis on time so that reproducible results are available.

The mill is installed and the production line is in operation. The operator responsible looks after other production lines. 

The operator enters in the control software that the grinding is completed after an energy input of 200 kW/h.

The operator also enters in his Notify app that he is to be notified by signal tone and SMS when the energy input reaches 190  kW/h.

He is notified in advance on his device that the energy input will be reached soon.

The operator is at the machine in time to initiate further process steps.

The batch production process proceeds smoothly and is not delayed.

The mill is installed and in operation.

The process manager responsible for the product / production is currently on a business trip abroad.

During production, the operator notices that the process parameters are changing, which consequently has an impact on product quality.

At the same time, the process manager also receives a message about the changed process parameters on his end device.

The process manager can immediately analyze, evaluate, redefine or correct the process values with the operator.

The production process continues without delay and the quality of the batch was not compromised. 

The mill is installed and the production line is in operation. We are grinding pigment for printing ink industry.

The operator has set his parameters for the machine so that a message / warning is sent when a critical temperature is reached.

The operator turns to another production process and is otherwise occupied for 6 hours.

The temperature increases slowly and reaches the critical parameter of 55 degrees.

The operator receives a message about the rising temperature. He goes to the machine and adjusts the speed of the mill.

Production continues as usual.

The mill is installed and in operation.

The mill starts grinding the batch. The operator has set an output of ... in the control system.

The operator knows that, for this formulation, the mill output can decrease. Therefore, he sets the Notify App to send him a notification.

The operator knows that grinding will be completed after 120 min. He devotes the next few hours to another production process.

After 40 min, the output of the mill decreases by ... because the viscosity has changed due to the grinding of the formulation.

The Notify app now sends a message to the operator.

The operator immediately goes to his mill and makes a correction to the output so that the production process is completed on time and no delay occurs.

The mill is installed and in operation.

Activated carbon for water treatment is processed on the agitator bead mill in recirculating mode.

Due to the reactivity of the carbon particles (agglomeration), the viscosity of the product increases sharply during the process.

An inline mass/viscosity measuring device was integrated into the process and linked to the control system and the Notify app.

The operator can now set a viscosity limit via a freely adjustable Notify message and will receive a notification when the value is reached.

With Notify, the operator and production manager are no longer tied to the machine and receive an optimal and comprehensible process control / overview).