_Ural - Molino clasificador de aire - Maquinaria de Molienda y Dispersión

NETZSCH Ural Air Classifier Mill is an impact grinding system with an integrated classifier and therefore ideal for products with steep particle size distributions. The multipurpose mill can be used for soft and medium hard minerals where wear resistant materials can be chosen. The mill can be equipped with different grinding housing as well as different impact elements, depending on the product and final product specs.

There are also several designs and materials available for the classifier, depending on the product and final particle size:

Mild Steel
Hardened Steel
Ceramics

NETZSCH Ural can be operated with ambient air, hot air as well as dried and cooled air which covers a wide range of mineral applications. The mill combines drying, grinding and classifying processes in one compact unit.

Ural has been designed with a grinding disc and classifier rotor, which are attached to a double shaft. This design and the operation with VFD's makes it possible to adjust the rpm's of grinding and classifying independently. Product ground by the high impact forces of the grinding disc is delivered to the classifier where fine product is accepted and coarse is rejected back into the grinding zone.

There are two air inlets: the main air inlet at the bottom of the mill disc and another which is used to feed the fresh product. Product accepted by the classifier will leave the mill on the top section through a center opening, connecting the mill to a final product filter or cyclone.