Dry Grinding

Jura - Jet Classifier Mill

Autogenous grinding system ideal for contamination - free processing.

Multiple horizontally installed nozzles guides the pressurized air into the center and provide the energy for grinding products. The fine ground product is elevated by the grinding and classifying air up to the vertically installed rotor where the fine fraction are separated.

Even the hardest of products poses no problem for this machine. In addition, extremely temperature sensitive products can be processed under continuous  operation.

Focus on Your Advantages

Sharp cut point down to d98 <2 μm
Processing of very hard/abrasive products
Steep particle size distributions
Contamination-free processing
Low sound level operation
Easy product change due to quick cleaning

Request Product

We do not only promise quality, but also individual consulting. Let us start your project together.

Your Inquiry

Technique

  • Fineness from d97 < 2 µm to d97 70 µm (based on limestone)
  • Air jet mill for the ultra-fine grinding of soft to hard materials in a fluid bed
  • Exact defined maximum particle size through integrated dynamic air classifier
  • Vortex free fines outlet with expansion chamber to reduce circumferential speed and wear as well as buildup of residues
  • Classifier wheel with exchangeable, simultaneously rotating immersion tube to achieve highest fineness, unlimited adjustment
  • Gap between classifier wheel and fines outlet rinsed by gas for highest possible prevention of coarse grains
  • Classifier shaft seal rinsed by compressed gas to protect the bearings
  • Entirely autogenous grinding - no tool wear - no contamination
  • Warming of product prevented by grinding with cooled gas (20°C), therefore applicable for extremely temperature sensitive materials
  • Significantly lower compressor capacity as opposed to comparable jet mills
  • Highest finenesses and maximum throughput achievable with just one classifier wheel
  • Hinged classifier head provides good access for fast and easy cleaning and maintenance
  • Reproducible results can be obtained
  • Optional designs available: pressure shock resistant, gas tight, inert

Applications

  • Ceramics (i.e. Oxides, Carbides, Nitrides and Silicates)
  • Abrasives
  • Rare Earth (i.e. Neodymium Iron Boron, Cerium Oxide, Samarium Cobalt, etc.)
  • Pure and Contamination Free Products (i.e. Silica Gels, Fluorescents, etc.)
  • Pesticides
  • Resins, Waxes, Fats
  • Tungsten carbide rotors
  • Mineral Powders (i.e. Talc)

Your Contact at NETZSCH

Any specific questions? Contact us for help.